|
Features and Benefits:
These are XPT Duct Leakage Tester Fan Blowers which are commercial grade 319 cast aluminum, having a 3/16" minimum wall thickness. Housing halves are attached with tapered lugs having a minimum 45 degree taper from centerline for additional strength. Inlets and outlets are round for convenient slip fit of duct work or hose. Blowers are AMCA type B spark resistant or better. Blower performance are derived from data as tested per AMCA Standard 210. Blower wheels are 356 aluminum with a T6 heat treatment.
Specs:
* 10 5/8 x 2 5/8 inch width and wheel diameter
* 1 HP 115 Volt single phase motor
* 5 inch diameter size inlet
* 4 inch diameter size outlet
* 3500 RPM
* direct drive
* Approx weight 80 lbs
Performance:
* 598 CFM @ 1.0 in sp, .83 BHP
* 555 CFM @ 2.0 in sp, .79 BHP
* 510 CFM @ 3.0 in sp, .75 BHP
* 460 CFM @ 4.0 in sp, .65 BHP
* 412 CFM @ 5.0 in sp, .59 BHP
* 365 CFM @ 6.0 in sp, .52 BHP
* 287 CFM @ 7.0 in sp, .44 BHP
$889.58
|
